◘ Double shell designed for the excellent sterilizing and drying function。

◘ Patented locking device used for easy door operation, no rotation needed to lock chamber door

   inposition。

◘ Select the preset program and press “start” button, the full cycle runs and is traced by

   illuminated  indicators automatically。  

◘ Flash cycle takes few minute for sterilization。

◘ Maximum allowable working pressure: 2.8kg/cm.  Maximum working temperature: 137℃.

◘ Built-in steam generator with water feeding system for high performance。

◘ Steam trap expels the unsaturated steam and timer acts only when temperature is built up to

   ensure effectual sterilizations。

◘ Stainless steel solenoid valve used for long life service。

◘ Two tanks used for clean water and used water separately to avoid piping blocked up。

◘ Set value and actual value display at the same time for easy read。

◘ IC-board control system with digital timer count-down for easy operation。

◘ Maximum range of dial pressure gauge: 6 kgf/cm², range of digital thermal indicator: room

   temperature – 199℃。

◘ Safety devices：

A.The sterilizer can be started while door is properly closed and locked.  Door cannot be opened

   while chamber pressure is more than 0.2kgf/cm²。

B. A safety valve relieves the over-loaded pressure automatically in case that pressure is over

    2.8kg/cm²。

C. A buzzer alarms and the power cuts off if low water or over-heating。

D. The power turns off in an event of electric leaking。

E. Slow exhaust for the sterilization of liquids to prevent liquids from splashing。

E.Alarm indicators including：

    E0:door unlocked　 E1: low water　 E2:vacuum fail    E3: warmer fail

    E4:abnormal temperature　  E5: heater fail    E6:thermal sensor fail

Specifications：

*Specifications should be subject to change without prior notice!